Vaccine management guide for the control of Enteric Redmouth Disease (ERM) in Trout.09 April 2007
By Schering-Plough Aquaculture - Enteric Redmouth Disease (ERM) is a bacterial disease of farmed rainbow trout and is endemic in Europe, North America and Chile. Losses from ERM due to mortality and poor growth can be high and the economic effects severe.
This bulletin is designed to assist with effective mixing and feeding of AquaVac ERM oral vaccine with high quality fish feed. The vaccine is provided by Schering-Plough Animal Health as part of the company’s Total Protection Strategy. If you would like any further information please contact your local Schering-Plough Animal Health representative.
You can download the complete PDF version of this bulletin by clicking here. Whilst this web version has been thoroughly checked, it is strongly advised you use the approved PDF version for accuracy.
Planning the oral vaccination booster
Aqua Vac ERM oral vaccine is administered in normal fish feed and is designed for use as a booster to immunity, given 4-6 months following the primary vaccination using AquaVac ERM immersion. When planning the booster vaccination a number of elements must be taken into account to optimise the booster effect:
- The quality of the primary vaccination
• The primary immersion vaccination (size of fish, water temperature, health status of fish).
- The ERM disease cycle
• The water temperature and the seasonality of the ERM disease in the specific site being vaccinated.
- Production targets
• Production cycles on the site being vaccinated. For further information on vaccine booster timing please refer to your vet or speak with your Schering- Plough Animal health representative.
On Farm or Feed mill mixing
AquaVac ERM Oral provides the flexibility needed to suit the wide variety of farm sizes and farming practices within the trout farming industry today. It can be mixed at the location that is most appropriate for the individual farm unit or the site that is vaccinating.
- Feed mill mixing: When a large biomass or number of fish are to be vaccinated, the vaccine and AquaVac Ergosan can be mixed into the feed at your feed mill and delivered to the site as with normal feed deliveries.
- On Farm mixing: For smaller scale use or for farmers vaccinating only a few fish, on farm mixing may be the most appropriate method.
The sections of this technical bulletin on recommendations to determine vaccine feed mix, calculating the feed vaccine mixture, and feed preparation and mixing, are designed for use by farmers who mix the vaccine feed on site. However the following sections on feeding of the vaccinated diet and monitoring of the vaccination sections are applicable to all oral vaccination.
If the mixing is to be done at the feed mill and multiple batches of fish must be vaccinated, please contact your Schering-Plough Animal Health representative to discuss the instructions for calculating the optimum vaccine, feed and oil mix to be used.
Handling and storage of AquaVac ERM Oral
Prior to use, AquaVac ERM Oral should be kept refrigerated. On the day of use, the correct amount of vaccine should removed from refrigeration and kept at room temperature (20 - 22 °C) for at least 1 hour prior to use or until consistency is completely fluid. During this period it is important to avoid exposure to direct sunlight or to direct heat sources.
Use of AquaVac Ergosan* and high quality fish feeds.
Fish health and nutritional status are important at vaccination to ensure the best possible immune response to the vaccine. To help maintain good health and optimise the nutritional status of fish, a high quality diet should be used and this may be complemented by the use of AquaVac Ergosan. AquaVac Ergosan is a complementary feedstuff made from seaweed. It is used to optimise the nutritional status of the fish and ensure that the optimal immune response to the vaccine is achieved. Its use is recommended by Schering-Plough Animal Health Aquaculture and is considered to be an integral part of the Total Protection Strategy.
Recommendations to determine vaccine feed mixHere are six recommendations, which determine the correct mix of vaccine in the feed:
- The vaccine dose = 0.1ml of vaccine per fish -
1 litre of vaccine = 10,000 fish.
- The vaccine feed should be fed over a period of ten days, split into two periods of five days with a five days break in the middle, as shown below;
Day 1-5 0.01ml per fish per day +
AquaVac Ergosan (0.2% Inclusion)
Day 6-10 No vaccine Day 11-15 0.01ml per fish per day.
- To ensure the optimum nutritional status of the fish, AquaVac Ergosan should be mixed into the feed (prior to the vaccine being mixed) at a rate of 0.2% (2Kg per tonne of feed). This should be done for the vaccine feed prepared for at least days 1 – 5.
- To ensure 0.01ml of vaccine is fed to each fish each day, the exact amount of feed to be mixed with the vaccine is determined by the average fish size and the desired average percentage feed rate for the batch of fish being treated.
- To ensure homogeneity of the vaccine feed, the vaccine inclusion in the feed should be at least 3% (3 litres vaccine: 100Kg feed). If the vaccine to feed ratio falls beneath this level, fish oil can be pre-mixed with the vaccine prior to adding it to the feed to bring the liquid volume up to the 3% minimum level.
- Feeding of the vaccine feed should commence within 4 days of mixing.
Calculating the feed vaccine mixture
- The daily amount of vaccine per fish is fixed throughout the program – 0.01ml
- The length of the program is fixed – 10 days
Step 1. Collate data from each batch of fish to be vaccinated
• Fish numbers
• Average fish size
• Feeding rate
Step 2. Calculate the average fish weight and the suitable average feed rate for each batch to be vaccinated.
This data can then be used to calculate
• How much feed to mix with the fixed amount of vaccine • How much AquaVac Ergosan should be used • How much fish oil (if any) must be used to ensure homogeneity
Working Example:Calculating Vaccine inclusion and feed quantity
For 30,000 fish of 40g that are being fed at 1% per day, the following must be calculated:
|10,000 fish||1 litre of vaccine therefore|
|30,000 fish/ 10,000||= 3 litres of vaccine required|
|Weight of fish||= 30,000 fish x 0.040Kg = 1,200Kg|
|Weight of feed (10 days)||= (1,200Kg x 1%) * 10 days = 120Kg|
Calculating AquaVac Ergosan weight
Remembering that AquaVac Ergosan should be mixed in as well, we can now also calculate that from the 60Kg of feed used in the first 5 days of vaccination we would need to add 0.2% of this weight in complementary feed, which equates to 120 grams.
Ensuring HomogeneityIf only 3 litres of vaccine were mixed to 120Kg of feed, homogeneity could not be achieved because this is only 2.49% of the volume of feed.
To ensure homogeneity the following is required 120 Kg of feed x 3% = 3.6 Litres of fluid.
Therefore in this case, only 3 litres of vaccine is used. The additional 0.6 litres of fish oil must be pre-mixed with the vaccine.
Your vet or Schering-Plough Animal Health representative can be contacted to ensure the calculations have been made correctly.
Feed preparation and mixing
- As stated, the vaccine should be removed from refrigeration and left at room temperature for 3 hours or until consistency is completely fluid, and be well shaken prior to mixing with feed.
- Special Instructions for the vaccine feed being prepared for the first 5 days of the treatment. AquaVac Ergosan should be mixed into the feed prior to the vaccine/fish oil. It should be added to a rotating mixer containing the feed and allowed to circulate for 5 minutes ensuring even distribution of AquaVac Ergosan over the feed.
- Vaccine (or any fish oil and vaccine mixture) should be added to a rotating mixer containing the feed (and containing AquaVac Ergosan if preparing for the first five days of vaccination) and allowed to circulate for 5 minutes ensuring even distribution of the vaccine in the feed.
- When the mixing cycle is complete, it is important that the feed should then be allowed to absorb the vaccine fully and then dry. The drying process ensures the prescribed vaccine intake is fully maintained. The vaccine feed should not be exposed to direct sunlight or heat source.
- The vaccine feed should be stored in a cool dry place. It should be clearly marked with the following information:
- the date of preparation
- the batch of vaccine used
- the incorporation rate of vaccine on feed
- the tank or batch of fish for which the vaccine feed has been prepared
- the amount of vaccine feed to be fed per day
- when the vaccine feed should be fed.
Feeding of the vaccinated diet
To ensure that the most effective vaccination with AquaVac ERM Oral is achieved, there are a number of principles to observe and practical steps to follow.
- Trout health is an important factor as it affects the immune response capability of the fish. Also, correct dosing of the vaccine is dependent on feed intake, and unhealthy fish will either not eat or suffer from reduced appetite. Therefore only vaccinate healthy fish.
- If ponds/raceways contain any diseased trout, treat prior to vaccination, and allow fish to recover fully before vaccinating.
- Monitor feed intake in the days prior to vaccination to ensure targeted intake levels are achieved.
- Do not stress, move or mix trout during the vaccination period or in the immune induction period after vaccination. Any factors that depress immune response and feed intake will limit immune induction.
- Monitor water flow, temperature and quality throughout the vaccine period.
Introduction of vaccinated feed
- Ensure that you have the required amount of vaccinated feed prepared and AquaVac Ergosan mixed for the first half of the treatment.
- Keep feed fresh and protected from moisture and sunlight.
- Maintain your standard daily feeding routine throughout the vaccination.
- Check that the dosing levels are correct for the trout population.
- Vaccinated feed should be fed at up to 90% of the daily ration over the treatment period; however, farmers can top up with regular feed at the end of each day. The objective is to ensure the vaccine feed is completely consumed during each day but that no growth is lost.
- When feeding the vaccinated feed, ensure even distribution to the trout population.
- Do not over feed. Ensure that all feed is consumed at each feeding point.
Monitoring the vaccination
- Observe trout behaviour and general health at feeding.
- Make sure any major deviation in feed intake is recorded so that your vet or Schering-Plough Animal Health representative can give you the best practical advice to ensure the best alternative vaccination strategy.
- Check that there is enough vaccine feed prepared in advance to ensure continuous vaccination.
- Ensure that the correct amount of vaccine feed is fed to each separate tank or holding unit.
- Ensure that the interval days are correct – No vaccination days 6-10.
- Maintain complete records of vaccination dates and rates for each tank.
Download the PDFTo download the complete PDF version of this bulletin (ideal for printing) click here.
*AquaVac and Ergosan are worldwide trademarks of Schering-Plough LTD. or any affiliated company.
As with all pharmaceutical products please follow the label directions and advice provided by your veterinarian.
This literature is intended for international use. Specific product details of formulation, storage conditions, indications, registration licence status, and trademarks may vary from country to country. Users should check the licence status, local label and/or data sheet for exact specifications of usage or contact the local Schering-Plough Animal Health representative.
Copyright © 2006 Schering-Plough Animal Health Corporation. All rights reserved.